Contact us now for a limited-time offer to test your materials free of charge. Don’t miss out—reach out today!
Menu
Contact us now for a limited-time offer to test your materials free of charge. Don’t miss out—reach out today!
Hay shredder is designed for shredding straw or hay pressed in rolls. In certain cases, after obtaining the manufacturer’s permit or testing, it is possible to shred square or rectangular pressed bundles. Required fraction of the shredded product at the output is possible after selecting a sieve of a certain throughput from the range offered by the manufacturer. In case product fractions of a smaller size are needed, insert a finer sieve, and vice versa.
The finer the sieve is, the higher is the kg/h throughput of the shredder, and vice versa. The user should select these parameters according to desirable result of throughput and fraction ratio. The shredder with the conveyor is adjusted for the operations described in the manual in usual operation conditions. If the shredder is used for other works or in potentially dangerous conditions, the manufacturer assumes no responsibility for the consequences of operation. In case of adverse conditions of operation, it is necessary to contact the manufacturer of the equipment or its representative.
Throughput
Main motor
Revolutions
Blades
Power
Output screen
Lenght
Width
Height
Weight
The maximum amount of material the shredder can process per hour, up to 1200 kg/h. This indicates its efficiency in handling straw or hay pressed in rolls.
A 38.1 kW motor powers the shredder, providing the necessary mechanical energy to drive the shredding process effectively.
The SS-D180 shredder operates at a speed of 983 RPM (revolutions per minute). This rotational speed is critical for its function in shredding straw or hay pressed in rolls efficiently. Higher RPM generally indicates faster cutting or shredding capabilities.
The SS-D180 shredder features 4 large blades designed for cutting hay and 40 small blades measuring 175x50x5 mm for efficiently shredding hay into finer particles.
The shredder operates on a standard electrical supply of 380V, 50Hz, indicating its power requirements for industrial use.
Utilizes sieves or screens that accommodate shredded material sizes ranging from D10 to 35 mm, allowing for customization of the output particle size.
The external measurement of the shredder’s length is 2300 mm, providing an indication of its physical size.
The external measurement of the shredder’s width is 2200 mm, providing an indication of its physical size.
The external measurement of the shredder’s height is 2350 mm, providing an indication of its physical size.
The weight of the shredder is 750 kg, indicating its mass and aiding in transportation and installation considerations.
Throughput
Main motor
Revolutions
Blades
Power
Output screen
Lenght
Width
Height
Weight
PLACEMENT
SIMILAR
Engineering and manufacturing solutions for the recycling industry.
Deltuvos st. 22 LT-20122 Ukmergė, Lithuania
Copyright © 2024 UMP TECHNIKA | All Rights Reserved | Terms & Conditions | Privacy Policy
CONTACT
Industrial shredders are the perfect waste management solution for any business with an excess of scrap materials to reuse or dispose of.
